Company Profile
Fukar Sdn. Bhd is a Shah Alam surface treatment company operating since 2005 under an ISO 9001:2015 certified quality management system
Fukar Sdn. Bhd was established in Shah Alam, Selangor in 2005 and today operates from a 12,000 sq. ft. facility at Lot 910, Jalan Sellathevan, Batu 4, Kampung Jawa. The site runs electroplating, coating, anodising, phosphating and passivation lines under a single ISO 9001:2015 quality management system.
This page is the reference profile for procurement and QA teams evaluating the company as a supplier. It is written as facts you can check: the facility, the credentials, the process capability, the milestones that built the capability, and the reference programs behind them.
Certification and approval documents are released on request — reference number, issue date, expiry date and scope — so a supplier qualification can be completed without waiting on a site visit.
Company Facts
Fukar Sdn. Bhd at a Glance
The facts a buyer checks first, before a site visit and before a purchase order.
Request Certification Documents| Item | Detail |
|---|---|
| Legal name | Fukar Sdn. Bhd. |
| Founded | 2005 — 20+ years in operation |
| Address | Lot 910, Jalan Sellathevan, Batu 4, Kampung Jawa, 40470 Shah Alam, Selangor, Malaysia |
| Facility | 12,000 sq. ft. |
| Quality management | ISO 9001:2015 certified |
| Coating approval | PPG Quality Approved Coater for Xylan 1010, Xylan 1070, Xylan 1424 and Xylar 2 — scope covers Malaysia and Thailand |
| Regulatory compliance | DOE Malaysia environmental compliance — a regulatory obligation, listed separately from certification |
| Regional manufacturing partner | Sanwa Thailand Pte Ltd, Samutprakan, Thailand |
| Telephone | +6019 352 3908 / +603 337 21722 |
| sales@fukar.com.my |
Quality Credentials
Certifications, Approvals and Regulatory Compliance
ISO 9001:2015
Operations follow ISO 9001:2015 process controls covering quality planning, production checks, documentation and continuous improvement, which supports audit-ready process records and consistent output across batch production.
PPG Quality Approved Coater
The approval covers application of the Xylan 1010, Xylan 1070, Xylan 1424 and Xylar 2 systems at the Shah Alam facility, with scope covering Malaysia and Thailand.
DOE Malaysia compliance
Environmental compliance is a legal requirement for metal finishing operations in Malaysia. It is listed separately from certifications so procurement and QA teams can see which credentials are voluntary third-party approvals and which are regulatory obligations.
Milestones
How the Capability Was Built
The milestones that took Fukar from a Shah Alam workshop to a 12,000 sq. ft. multi-process facility.
View Certifications| Year | Milestone |
|---|---|
| 2005 | Company founded in Shah Alam, Selangor with an initial focus on zinc electroplating for local manufacturers. |
| 2010 | Moved into the current Lot 910 facility and added automated plating lines to support higher-volume OEM orders. |
| 2014 | Achieved ISO 9001:2015 quality management certification, formalising process discipline across all production lines. |
| 2018 | Added Xylan fluoropolymer coating capability and became a PPG Quality Approved Coater for OEM fastener and automotive programs. |
| 2020 | Added anodising, phosphating and stainless steel passivation lines to provide a complete one-stop metal finishing service. |
| 2022 | Introduced zinc flake coating and Xylar 2 ceramic-metallic systems for high-temperature and heavy-duty corrosion applications. |
| 2024 | Added a zinc nickel plating line meeting ASTM B841 for automotive and defence-grade components. |
Reference Programs
Published Reference Work
PNG LNG project
Fukar delivered coating for 200+ tonnes of fasteners using Xylar 2 base coat and Xylan 1424 top coat for severe oil and gas service conditions.
Titan Metal Works
Fukar supported electroless nickel plating programs for solderability enhancement on electronics components.
Documentation
What You Get With an Order
Certification and approval documents are released on request: the ISO 9001:2015 certificate covering the Shah Alam facility, with reference number, issue date, expiry date and covered scope, and the PPG Quality Approved Coater recognition covering the Xylan and Xylar 2 systems, scoped to Malaysia and Thailand.
Salt spray test reports are issued per batch against the coating system and specification ordered, so every order can be verified against its own test conditions rather than against a general figure.
Before You Order
Supplier Qualification Checklist
Eight checks to run before Fukar is added to your approved vendor list.
Identity and facility
- Confirm the legal entity, the operating address and the facility size: Fukar Sdn. Bhd, Lot 910, Jalan Sellathevan, Batu 4, Kampung Jawa, 40470 Shah Alam, Selangor, on a 12,000 sq. ft. site.
- Check that the company has been trading since 2005, and that the site address matches the one on the certificate and the purchase order.
- Confirm a point of contact for technical questions and a named contact for quality documentation.
Quality system and approvals
- Request the ISO 9001:2015 certificate and check the reference number, issue date, expiry date and covered scope against the Shah Alam facility.
- Request the PPG Quality Approved Coater recognition and confirm it covers the specific system you intend to order, and the territory it covers.
- Note that DOE Malaysia environmental compliance is a regulatory obligation rather than a third-party certification, and treat it as such in your records.
Capability and coverage
- Confirm the process you need is actually run on site, along with the standard it is run to.
- Confirm the substrate families the supplier handles, and what sits outside each route.
- Confirm the regional arrangement if your program crosses markets, including the role of Sanwa Thailand Pte Ltd in Samutprakan, Thailand.
Inspection and documentation
- Agree the test evidence that ships with each order: per-batch salt spray test reports against the specification ordered, and the certificate of conformance.
- Agree where that evidence is issued, in what format, and against which specification reference.
- Agree the route for a batch query and the documentation that supports it.
Common Questions
Fukar Sdn. Bhd Company Profile FAQ
The company questions procurement, QA and engineering teams ask most often when qualifying a supplier.
Ask a Technical QuestionWhere is Fukar Sdn. Bhd located?
Fukar Sdn. Bhd is at Lot 910, Jalan Sellathevan, Batu 4, Kampung Jawa, 40470 Shah Alam, Selangor, Malaysia, on a 12,000 sq. ft. production facility.
How long has Fukar Sdn. Bhd been operating?
Fukar Sdn. Bhd was founded in 2005 in Shah Alam, Selangor, so the company has been operating for more than 20 years. It began with zinc electroplating and added coating, anodising, phosphating, passivation and zinc nickel capability over the following two decades.
What certifications and approvals does Fukar hold?
Fukar operates an ISO 9001:2015 certified quality management system and holds PPG Quality Approved Coater recognition for the Xylan 1010, Xylan 1070, Xylan 1424 and Xylar 2 systems, scoped to Malaysia and Thailand. The company also meets DOE Malaysia environmental compliance requirements, which are a regulatory obligation and are listed separately from the certifications.
Can I get the certification documents before placing an order?
Yes. The ISO 9001:2015 certificate and the PPG Quality Approved Coater recognition are released on request, including the reference number, issue date, expiry date and covered scope, so a supplier qualification can be completed without a site visit.
What reference work has Fukar delivered?
Two programs are published on this site: the PNG LNG project, where Xylar 2 base coat and Xylan 1424 top coat were applied to more than 200 tonnes of fasteners for severe oil and gas service, and Titan Metal Works, where electroless nickel plating programs supported solderability enhancement on electronics components. Both are covered in the case studies.
Related Pages
About Fukar
The company story and the milestone timeline behind the Shah Alam facility.
View About page →Certifications
ISO 9001:2015, PPG Quality Approved Coater and DOE Malaysia compliance, and how they differ.
View certifications →Case Studies
The PNG LNG fastener program and the Titan Metal Works electroless nickel work.
View case studies →Evaluating Fukar as a surface treatment supplier?
Send your specification, substrate and corrosion target. We'll confirm the process route and the documentation that will ship with the batch.