Skip to main content
Email us : sales@fukar.com.my

Xylan Fluoropolymer Coating Services in Shah Alam, Malaysia

Xylan® Fluoropolymer Coating

Low-Friction, Anti-Galling Coating for Fasteners and Industrial Components

Fukar provides Xylan fluoropolymer coating services for components that require low friction, controlled torque-tension behavior, and improved corrosion performance. Xylan systems are widely specified for industrial fasteners, valves, and mechanical components in demanding operating environments.

Our coating process is managed under ISO 9001:2015 quality systems, with controlled application procedures and PPG Quality Approved Coater oversight for Malaysian and regional manufacturing supply chains.

For severe-service fastener projects, Fukar has delivered large-scale coating programs including the PNG LNG project, where Xylar 2 and Xylan 1424 systems were applied across 200+ tonnes of components. Read the PNG LNG case study

Xylan fluoropolymer coating line for industrial fasteners and components in Shah Alam facility

Performance Highlights

Why Engineers Specify Xylan Coating

Low Friction & Anti-Galling

Reduces seizing and galling in threaded assemblies, improving installation reliability in field conditions.

Corrosion & Chemical Resistance

Provides barrier protection in corrosive and chemically exposed environments when system and topcoat are specified correctly.

Temperature Capability up to 260°C

Suitable for elevated-temperature operating zones depending on Xylan grade and service profile.

Technical Reference

Xylan Coating Specification Snapshot

Xylan coating selection depends on substrate, required coefficient of friction, corrosion target, and operating temperature. Requirements are confirmed during technical review before production.

Our team can align process output to your drawing notes and quality documentation requirements.

Discuss Your Spec
Parameter Typical Reference
Primary Standard Xylan® / Xylar® systems (project-specific requirements)
Common Thickness Range Typically 20–40 µm (system dependent)
Service Temperature Up to 260°C continuous (grade dependent)
Salt Spray Benchmark System-dependent, can be engineered for severe-service fasteners
Typical Use Oil & gas fasteners, automotive hardware, valves, industrial bolting systems

How It Works

Xylan Fluoropolymer Coating Process Flow

1. Degrease & Abrasive Blast

The part is degreased, then blasted or ground to the profile the coating specification calls for. Fluoropolymer needs a clean, slightly rough surface to anchor to.

2. Phosphatise or Prime

A phosphate conversion or primer layer is applied where specified. It gives the fluoropolymer something to key onto and improves adhesion on difficult surfaces.

3. Spray the Fluoropolymer

The Xylan or Xylar grade is applied by spray to the specified film build. A consistent wet film is what gives an even cured thickness across threads and recesses.

4. Flash, Cure & Bake

The coating is flashed off and then oven-cured. Cure temperature and dwell set the final adhesion, hardness and chemical resistance.

5. Cool & Inspect the Film

The cured part is cooled and checked for film build, coverage and visual faults. Thin coverage at edges and threads is where a coating usually fails first.

6. Certify & Pack

Film build and cure records are issued for the batch, and parts are packed so the cured film is not marked in handling or transit.

Before You Order

Xylan Coating Specification Checklist

Six things to confirm on the drawing or RFQ, so the job is quoted and run without a clarification loop.

Material and preparation

  • Fluoropolymer coating is applied to steel and to specified alloys. The material grade decides the preparation route.
  • State the substrate condition and the surface profile required. A smoother substrate than the specification allows reduces adhesion.
  • Mark masking requirements for threads, bearing seats and contact faces on the drawing.

Grade, film build and cure

  • Name the grade, for example Xylan 1424, Xylan 1070 or Xylar 2, and the required film thickness in microns.
  • State the service temperature and the chemical exposure. Grade selection follows the environment, not the appearance.
  • Specify any torque-tension requirement, since a coated fastener still has to hold its clamp load.

Common defects to watch

  • Orange peel, sag and fish eyes point to too much film build in one pass or contamination at preparation.
  • Edge coverage and thin build on threads are the most common reasons a coating is rejected at inspection.
  • Adhesion failure usually traces back to inadequate surface preparation or a missed primer.

Inspection and evidence

  • Fukar is a PPG Quality Approved Coater, and the coating is applied as a controlled two-coat process from our Shah Alam facility.
  • Film build is checked on the coated part, and the batch is issued with its coat and cure record.
  • Salt spray test reports are issued per batch against the coating system and specification ordered.

Common Questions

Xylan Coating FAQ

Answers to common specification and application questions from engineering and procurement teams.

Ask a Technical Question
What is Xylan coating used for?

Xylan coating is used to improve lubricity, reduce galling, and provide corrosion protection for fasteners and industrial components.

What is the difference between Xylan and fluoropolymer coating?

Xylan is a branded fluoropolymer system that can include fluoropolymer with engineered binders and additives. fluoropolymer coating is a broader generic category.

What temperature can Xylan coating withstand?

Many Xylan systems are rated for continuous service up to around 260°C, depending on the selected grade and operating conditions.

What quality controls support Xylan coating?

Fukar supports Xylan coating with ISO 9001:2015 quality systems and PPG Quality Approved Coater controls.

Where is Xylan fluoropolymer coating commonly used?

Common applications include oil and gas fasteners, automotive hardware, valves, and industrial components requiring low friction and corrosion control.

People Also Ask

Frequently Asked Questions

FAQ: Which Xylan grade should be specified?

Xylan is a fluoropolymer-based coating system applied to metal components to deliver low friction, non-stick release, chemical resistance, and corrosion protection in a single thin film. Fukar is a PPG Quality Approved Coater (QAC) for Xylan 1010, Xylan 1070, Xylan 1424, and Xylar 2 systems, so the grade can be selected against the real service environment. Send us the chemical exposure and the service temperature and we will recommend the grade.

FAQ: How is the coating thickness checked?

Film build is measured on the cured part rather than on the wet film, and the batch is issued with its coat and cure record. Xylan and Xylar systems are widely specified for automotive fasteners, oil and gas downhole components, food processing equipment, and chemical handling parts, and where corrosion performance is part of the specification a salt spray test report is issued per batch.

Xylan Grades

Xylan Coating Grades We Apply

Fukar is a PPG Quality Approved Coater (QAC) for the Xylan systems most commonly specified by Malaysian OEMs across fastener, automotive, oil and gas, and industrial component programs.

Xylan Grade Resin System Typical Thickness Key Property Common Application
Xylan 1010 PTFE / fluoropolymer 15–25 µm Low coefficient of friction, food contact compliance Fasteners, cookware, food processing hardware
Xylan 1070 PTFE-based with corrosion inhibitors 15–25 µm Combined low friction and salt-spray resistance Automotive brake hardware, marine fasteners
Xylan 1424 PTFE with high-temp binder 20–30 µm Continuous service to 260°C, topcoat for Xylar 2 Exhaust manifolds, downhole tools, fasteners near heat sources
Xylan 1052 PTFE with ceramic reinforcement 15–25 µm Improved wear and abrasion resistance Actuator threads, sliding contact components

Not sure which grade fits your application? Our technical team can review your substrate, service environment, and specification to recommend the right system.

Comparison

Xylan vs Xylar 2: When to Specify Which

Both are Whitford / PPG fluoropolymer systems applied under our QAC. They are often used together — Xylar 2 as a base coat for extreme corrosion, Xylan as a top coat for low friction — but the single-coat choice depends on the dominant failure mode you are designing against.

Xylan (single coat)

  • Best for low-friction release and anti-galling
  • Typical 15–25 µm thickness
  • Continuous service to 260°C (grade dependent)
  • Salt spray tested to ASTM B117 (report per batch)
  • Spec fit: fastener torque consistency, release

Xylar 2 (single coat)

  • Best for extreme corrosion and chemical exposure
  • Typical 20–35 µm thickness
  • Continuous service to 260°C
  • Salt spray tested to ASTM B117 on properly prepared steel
  • Spec fit: heavy industry, oil and gas, marine

Common stack: Xylar 2 base coat + Xylan 1424/1070 top coat delivers consistent torque-tension with per-batch salt spray documentation. Fukar applies this as a controlled two-coat process from our Shah Alam facility.

Where Xylan Excels

Industries We Serve with Xylan Coating

Fukar has supplied Xylan-coated components for Malaysian manufacturers in the following sectors. Each application has its own specification — contact us with your drawing or sample for a tailored recommendation.

Automotive

Brake system fasteners, chassis hardware, exhaust manifold bolts. Fukar's ISO 9001:2015 and IATF-aligned process control supports OEM PPAP submissions for tier-1 programs.

Oil & Gas

Downhole and subsea fastener coating, valve components, instrument housings. Fukar has delivered Xylan-coated fasteners for the PNG LNG project — over 200 tonnes of Xylar 2 / Xylan 1424 coated hardware.

Industrial & General Engineering

Actuator threads, sliding contact components, hydraulic fittings, mould release surfaces. Xylan provides the anti-galling performance and release behaviour these applications require.

Coating Services Hub

Explore Xylan, fluoropolymer, and zinc flake systems with coating selection guidance.

View hub →

Fluoropolymer Coating

Compare fluoropolymer-based systems for non-stick and chemical resistance requirements.

View service →

Zinc Flake Coating

Explore zinc flake systems for high-strength fasteners requiring embrittlement-safe corrosion protection.

View service →

Need Xylan fluoropolymer coating support for critical fasteners and components?

Share your component details, operating environment, and performance target. We'll recommend a suitable Xylan coating system for your application.